Fast, accurate and safe cutting of a wide variety of aluminium frame and sub-frame profiles. The MT481 saw is ideal for users cutting around 40 frames per day.
TCT blade, 250mm, cuts up from below, so vibration in the blade is absorbed by the unseen and sturdiest part of the profile before it cuts through the top face. This gives a very neat and precise join. Pre-set positions for 45° left, 90° and 45° right cuts.
Unique blade action and a stout polycarbonate cover means that swarf and offcuts are deflected back into the waste chute. They don’t whizz around the workshop at lightning speed as can be the case with normal single blade mitre saws.
• Adjustable pneumatic clamp with polymer face secures most profiles up to 54mm tall and 50mm wide. Check with our technical department if your profiles approach either dimension.
• Quickly and accurately mitre-cut or straight-cut aluminium pieces up to 1000mm. Scales system helps you set the adjustable stop to allow for different profile widths.
• 0.75hp direct-drive 3000rpm single-phase motor is low-noise.
• Offcuts fall down chute into box for disposal. Blow gun for clearing work surface.
220 / 230 V (50Hz), Nominal power 0.75 hp 3000 rpm
Saw blade: 250mm x 30m bore, 80 tooth
Max cutting height 54mm, max cutting width 50mm
Overall width 1500mm. With optional left-hand support, 2480mm.
Machine height 1180mm, depth 510mm, 95 Kg
Requires 13 amp connection and compressed air supply